Skip to main content

rubytone

Viola2025

9.44Scorecard
Hollow-BodyStandard Scale

What Happens If the Body Is Wood?

Viola2025 started with a question.

I’d already been experimenting with Emenee plastic toy-guitar bodies, and I liked what was happening.

The construction allowed me to separate the structural components of the guitar from the body that contained the amplifier and speaker.

But I didn’t know how much of what I was hearing came from the design and how much came from the fact that the body was plastic.

What would happen if I used wood instead?

A viola seemed like an obvious candidate.

This time, however, I didn’t want to cut the body apart. I wanted to see whether I could leave an entire 16-inch viola intact and give it a completely different function.

The neck came from a Gretsch G5220 Electromatic Jet BT.

Or, more accurately, from what was left of one.

The neck had been separated from its original guitar in what looked like an El Kabong incident.

Perfectly good neck.

It just needed another guitar.

For the structural beam, I used an oak stave reclaimed from a whiskey barrel.

The neck, bridge, and pickup were supported by the beam rather than by the viola body.

That allowed the viola to remain intact while providing the enclosure for the electronics and speaker.

The arrangement was straightforward enough.

But I was particularly interested in what I would hear when I finished.

The Viola Has Its Own Personality

I installed a DiMarzio mini-humbucker using a dogear conversion plate and a Fender-style top-loading hardtail bridge.

Inside the viola went a NUX Mighty Lite amplifier with three presets.

Its three-inch speaker was mounted directly to the maple back of the viola.

Everything fit inside the original body.

Nothing needed to hang off the outside.

That was satisfying in itself, but the real question concerned the sound.

Yes, the wood made a difference.

The intact wooden viola produced a noticeably warmer character than the plastic Tiger body I’d been using.

That was interesting.

But it didn’t mean I’d discovered that wood was better and plastic was wrong.

I liked things about both instruments.

They had different personalities.

And that was a much more useful discovery than simply declaring one material superior to the other.

It meant I could use the same general construction method with very different bodies and expect each one to contribute something of its own.

The body material had become another variable I could experiment with.

And that changed the way I thought about the entire design.

The Body Doesn’t Have to Hold Everything Together

Viola2025 helped clarify something that had been developing through several earlier Rubÿtones.

The body doesn’t have to be the structural center of the guitar.

The beam can do that job.

It can establish the geometry, support the neck and bridge, and carry the tension of the strings.

The donor body can be allowed to do something else.

It can provide the shape, the visual identity, the enclosure, and the speaker cabinet.

And it can contribute its own acoustic character without being responsible for holding the entire instrument together.

That separation opened up possibilities I hadn’t fully appreciated before.

Once the construction method was established, I no longer needed to approach every new instrument as an entirely separate engineering problem.

I could start refining the details.

Controls could move to more convenient locations.

Amplifier cabinets could be reduced or eliminated.

Different speaker arrangements could be explored.

And bodies made from entirely different materials could become part of the same family of instruments.

That progression eventually led toward Viola26 and TigerJazz.

TigerJazz, in particular, benefited from the lessons I’d learned by comparing the wooden viola with the plastic Tiger.

I wasn’t simply trying to prove that an unconventional body could become a real guitar anymore.

I’d already established that.

Now I could concentrate on making the resulting instrument better.

Viola2025 wasn’t the end of the experiment.

It was the point where I understood the experiment well enough to start asking a more interesting question. How far can I take it?

View this guitar in the Rubÿtone Archive

Leave a Reply

Your email address will not be published. Required fields are marked *