Skip to main content

rubytone

MiniHuh?

9.47Scorecard
SimpleMini

Telephone Game

MiniHuh? began during a long-distance conversation with a friend about how to make a guitar smaller.

The objective was straightforward: reduce the instrument’s overall length enough that it would be easy to bring along practically anywhere.

Shortening the scale length seemed like an obvious place to start, but there are different ways to accomplish that. We were exploring what might happen if we approached the fingerboard itself differently.

I had a guitar neck with a serious problem. Its fingerboard had delaminated nearly a third of the way along its length. Rather than attempting to repair it, I discovered that I could peel the rest of the fingerboard away with a putty knife.

That gave me an opportunity to reconsider the entire playing geometry.

Instead of simply shortening a conventional neck, I could rearrange the fingerboard in a way that would make the finished instrument look almost impossible to understand at first glance.

That bewildering appearance became an important part of the design.

A Bridge That Solved Two Problems

For the body, I reached considerably further back into my own musical history. I had an old, heavy-metal-style five-string bass that I’d played in bands during the 1990s. MiniHuh?’s body came from part of its lower cutaway horn.

The bridge followed an approach I’d also explored with MiniTrucker.

I took a Stratocaster-style whammy bridge and mounted it through its substantial tremolo block rather than through the bridge plate. The assembly was fixed in position, turning a mechanism designed to move into a rigid string anchor.

But MiniHuh? introduced another possibility.

I was able to sandwich an under-saddle piezo transducer between the bridge plate and the structural beam.

That solved two problems at once.

First, I could use cello and viola strings, which wouldn’t work with conventional magnetic pickups. The piezo responded to mechanical vibration rather than relying on the magnetic properties of steel guitar strings.

Second, I didn’t need to find a place for a magnetic pickup.

That was particularly important because there really wasn’t anywhere to put one without compromising the strange visual effect I wanted from the chopped-up fingerboard arrangement.

The bridge and transducer allowed the instrument’s appearance and playing geometry to remain the focus, without a conventional pickup interrupting the design.

An endpin-style piezo preamp went inside the amplifier enclosure, with a switch that disconnected it whenever the power amplifier was shut off.

Taming the Brightness

Of course, making an instrument this small introduced some interesting tonal problems.

The combination of short scale, unusual construction, and piezo pickup produced a seriously bright sound. There was plenty of output, but the character was more brittle than I wanted.

The cello and viola strings helped produce a warmer response while remaining gentle on the fingers. I also added another tone control, using doubled-up capacitors to extend the amount of high-frequency reduction available.

That helped, but I still wasn’t satisfied with the Fender MiniDeluxe amplifier.

Replacing it with a NUX Mighty Lite opened up considerably more tonal possibilities. Its presets gave me enough control to eliminate the unmusical feedback and produce a sound that was sweet and pure.

MiniHuh? began as a conversation about making a guitar shorter. It became an experiment in fingerboard geometry, salvaged instrument parts, unconventional bridge mounting, and tonal problem-solving.

What I particularly enjoy is that the unusual appearance wasn’t simply decoration. The decision to preserve that bewildering fingerboard arrangement influenced the pickup, strings, bridge, and amplification system.

Sometimes the smallest instruments present the biggest puzzles.

View this guitar in the Rubÿtone Archive

Leave a Reply

Your email address will not be published. Required fields are marked *