Marquis6BassJr.
Six Strings From the Remains of Two Necks
The neck started as a Mustang Bass neck that I found on eBay.
Its headstock had been broken off and was completely missing, which made it exactly the sort of thing that interests me.
The replacement came from an old Harmony neck that wasn’t worth saving as a neck, but its headstock was.
It already had Marquis written across the front, so when I grafted it onto the Mustang neck, it gave the bass more than a headstock.
It gave it a name.
The Jr. comes from the proportions.
This is a six-string bass built around a 30-inch Mustang Bass scale and a little 13-inch violin body.
I chose that particular violin because it shows so much age and wear.
I like that.
I don’t want an old piece of wood to pretend that it’s new. The scratches, discoloration, and evidence of its previous life are part of what made me want to use it.
An oak wine-barrel stave runs through the middle—with the bunghole left right where it was—and the strings continue across a Les Paul Jr. wraparound bridge to a trapeze tailpiece.
There are a lot of different histories visible in this one little bass.
I don’t see any reason to erase them.
The Reason This Rubÿtone Is in the Garage
The Harmony PowerPal is dead.
The simple solution would be to replace it.
A few years ago, that’s probably exactly what I would have done.
But replacing the amplifier isn’t the only possibility anymore.
I’ve built enough other Rubÿtones since Marquis6BassJr. that I’m now looking at the entire instrument differently.
The neck works. The six-string, short-scale concept works. And the little violin body has exactly the kind of character I look for in reclaimed instruments.
There’s no particular reason to abandon any of that.
Except that another idea has been waiting for an opportunity.
The First Tiger Plastic Bass?
I keep looking at Marquis6BassJr. and imagining something considerably stranger.
What if it became the first Tiger Plastic bass?
I want to try taking this six-string, short-scale bass idea and putting it into one of the vintage plastic Emenee/Maccaferri-style bodies I’ve been working with.
I would retain the neck—with that salvaged Marquis headstock—and the bridge and tailpiece concept that established this bass’s character in the first place.
But I’m not convinced I should do it.
The worn little violin body is one of my favorite things about the current version. Replacing it with plastic isn’t obviously an improvement.
It’s another experiment.
And that’s an important difference.
The amplifier needs to be replaced.
The violin body doesn’t.
So before I fix the obvious problem, I want to decide whether I’m repairing Marquis6BassJr. or using what I’ve learned from it to make something I haven’t built before.
It could go back together with a new amplifier and remain essentially the bass it already is. Or the surviving parts could become the starting point for the first Tiger Plastic bass.
For now, I like both possibilities enough that I’m not ready to eliminate either one.
Sometimes the Garage isn’t where I put something because I don’t know how to finish it.
It’s where I put it because I haven’t decided which good idea gets to happen next.
View this guitar in the Rubÿtone Archive











